MODEL:Key technical parameters
Power:Tri_phase 380V, 50HZ
Main motor:92Kw(gluing machine,air compressor exclude)
Dimension(Lx W x H mm):21,000x2,500x3,000 mm
Speed:60meter/min
Operator:3-4 persons
Qualification Rate:>= 96%
Description:
1.Mixed manufacture with S.A.P
2.Two way for cotton core molding
3.Equipped with high effective pulverizer.
4.Equipped with elastic waistline,front waist sticking,side waist sticking and solid-protecting,leg-elastic structure
5.It can produce two sizes(L.S) products
6.Finished products stacked out in a line of triple-fold.
7.The positioning and molding process are all equipped with electromotive differential to operate and control,regulate relative positions without stopping machine.
8.The Driving system operates connecting with sealed gear case ,universal joint and sychronous chain. It has high synchronism and stably drive.

MODEL:

Technology key parameter:

Power: triphase 380V, 50Hz (60Hz)

Total power: 85kW(exclude hot melt and air compressor machine)

Dimension (L x W x H): 18,000 x 2,500 x 3,000mm

Speed: 100meter/min

Qualification rate: ?96%

Operator:2-3 person

 

Characteristic and functions:

1.It can produce the under pad with different size

2.The width of product is ?600mm.

3.Mixed S.A.P added.

4.Equipped with high effective pulverizer machine.

5.Finished product out in line for triple-fold.

6.Input fixed positions of product material are all equipped with differential mechanism to operate and control,regulate relative positions without stiopping machine.

7.Driving system consists of close gearwheel box,universal joint shaft,sychronous belt connects with chains,with the feature of sychronzation and stable driving.

8.PLC+ touchable screen + Frequency controlling syestem.

9.Inspector and alarm for material broken and shortage. Waste rejection when material splicing

MODEL:Key Technical parameter:
Power: tri-phase 380V, 50Hz
Main motor: 64kW (gluing machine, air-compressor excluded)
Dimension (L x W x H): 15,000 x 2,500 x 2,700mm
Speed: 150-200pcs/min
Qualification rate: >=96%
Operator:2-3 persons
Packing: Wooden box packing
Characteristic and Functions:
1.It can produce three sizes(L.M.S) products.
2.Mixed manufacture with S.A.P .
3.Equipped with high effective pulverizer.
4.Equipped with elastic waistline,front waist sticking,side waist sticking and solid-protecting,leg-elastic structure.
5.Finished products stacked out in a line of triple-fold.
6.The Driving system connects with sealed gear case ,universal joint and sychronous belt.It has high synchronism and stably drive.
7.The positioning and molding process are all equipped with electromotive differential to operate and control,regulate relative positions without stopping machine.

MODEL:Key technical parameter:
Power: tri-phase 380V, 50Hz
Main Motor: 105 kW(gluing machine, air-compressor excluded)
Dimension (L x W x H): 20,000 x 2,500 x 2,700mm
Speed: 200-300pcs/min
Qualification rate: >=96%
Operator:2-3 persons
Packing: Wooden case packed
Characteristic and functions:
1.It can produce three sizes(L.M.S ) products.
2.Mixed manufacture with S.A.P .
3.Equipped with high effective pulverizer.
4.Equipped with elastic waistline, front waist sticking, side waist sticking and solid-protecting, leg-elastic structure.
5.Finished products stacked out in a line of triple-fold.
6.When lack of material or broken material take place, it will alarm. And it has the ability to eliminate the inferiority when changing or linking the material.
7.The Driving system connects with sealed gear case ,universal joint and sychronous belt.The gear case adopts helical wimble gear type.
8.The positioning and molding process are all equipped with electromotive differential to operate and control,regulate relative positions without stopping machine.
9.Include PLC+ touch-screen system + Frequency-Converter.
10.Opening raw material roll and linking can be operated automatically, with a constant tension control.

MODEL:1) Power: tri-phase 380V, 50Hz
2) Total power: 42kW (exclude hot melt and air compressor)
3) Dimensions (L x W x H): 17,600 x 2,300 x 2,300mm
4) Weight: 14,800kg
5) Speed: 180-280pcs/min
6) Qualification rate: ?98%

1. It can produce ultra-thin type, fluff core type  sanitary napkin with two length.
2. Independent packing form: finished sanitary napkin after departure molding by main machine becomes package type product after being undergone by each structure of small package machine.
3. Input fixed positions of product material are all equipped with electrical devices
to operate and control, regulate relative positions without stopping machine.
4. Driving system consists of close gearwheel box, universal joint shaft coupling
and optic synchronous belt with the feature of synchronization and stable driving.

MODEL:Key technical parameter:
Power: tri-phase 380V, 50Hz
Main motor: 54kW((gluing machine, air-compressor excluded)
Dimension (L x W x H): 16,000 x 2,000 x 2,100mm
Weight:15,000kg
Speed: 100-150pcs/min
Qualification rate: >=95%
Operator:2-3 persons
Packing: Wooden box packing
Characteristic and functions:
1.It produces the breast pad.
2.Adopts the needle-puncture pulverizer,has high effective crush.
2. The cotton core is made by net-wheel mould..
4.Mixed manufacture with S.A.P
5. Fold packed individually.
6. Installed with safety door.
7.The Driving system operates connecting with sealed gear case ,universal joint and sychronous chain. It has high synchronism and stably drive.
8.The positioning and molding process are all equipped with electromotive differential to operate and control,regulate relative positions without stopping machine

MODEL:Key technology parameter:
Power: tri_phase 380V, 50Hz
Total power: 60kW(gluing machine,air compressor exclude)
Dimension (L x W x H): 18,000 x 2,500 x 3,000mm
Speed: 60meter/min
Qualification rate: >=96%
Operator:2-3 persons
Packing: Wooden box packing
Characteristic and functions:
1.It can produce various types productions.
2.The width of product is <=600mm.
3.Mixed manufacture with S.A.P
4.Equipped with high effective pulverizer.
5.Finished product stacked out in a line of triple-fold.
6. The positioning and molding process are all equipped with electromotive differential to operate and control,regulate relative positions without stopping machine.
7. The Driving system operates connecting with sealed gear case ,universal joint and sychronous chain. It has high synchronism and stably drive.

MODEL:Technology Key Parameter:

1) Power: tri-phase 380V, 50Hz
2) Total power: 39kW (exclude hot melt and air compressor)
3) Dimensions (L x W x H): 13,300 x 2,300 x 2,300mm
4) Weight: 12,000kg
5) Speed: 180-200pcs/min
6) Qualification rate: ?98%

1. It can produce fluff core, polymer water absorption paper and ultra-thin side-protecting sanitary napkins.
2. It will be finished products after departure molding.
3. Cut polymer water absorption paper.
4. Get and compound shell fabric.
5. It has the guideway installation of emboss.
6. Have three piece type equipment.
7. Input fixed positions of product material are all equipped with electrical devices to operate and control, regulate relative positions without stopping machine.
8. Driving system consists of close gearwheel box, universal joint shaft coupling and optic synchronous belt with the feature of synchronization and stable driving.

MODEL:Technology Key Parameter:

Power: Triphase 380V, 50HZ
Total Power: 38KW (exclude hot melt and air compressor)
Dimension(L? W? HMM): 13800? 2300? 2300MM
Weight: 11500Kgs
Speed: 180-200PCS/MIN
Qualification rate: ?98%

1. It can produce fluff core,  absorption paper and ultra-thin side-protecting sanitary napkins.
2. Cut polymer water absorption paper.
3. Wrap up and cut non-dust paper.
4. Get and compound shell fabric.
5. It has the guideway installation of emboss.
6. Have three piece type equipment.
7. Input fixed positions of product material are all equipped with electrical devices to operate and control, regulate relative positions without stopping machine.
8. Driving system consists of close gearwheel box, universal joint shaft coupling and optic synchronous belt with the feature of synchronization and stable driving